After using furniture for a long time, people will get tired of the old and love the new. Because after a long time, there will naturally be many traces of bumps and bumps, which makes people feel uncomfortable. Here are four ways to renovate old Chinese Style Furniture.
If wax oil drips on the paint surface of the Chinese Style Furniture, never use a sharp blade or nails to scrape it. Wait until the daytime when the light is good, use a plastic sheet to slowly scrape the wax oil from the front of the body to the back, and then wipe it with a fine cloth; if the paint surface of the furniture is scratched, you can use a crayon or paint that matches the color of the furniture to cover the exposed base color, and then apply a thin layer of transparent nail polish; if the paint surface of the furniture is burned, you can wrap a layer of fine-grained hard cloth on a toothpick, gently wipe the mark, and then apply a thin layer of wax, and the burn mark can be removed.
Some Chinese Style Furniture will leave dents after collision because of the soft wood. At this time, you can first put a wet towel on the concave part, and then use an iron to heat and press it. If the dent is deep, filler should be added.
If cracks appear in solid wood furniture due to thermal expansion and contraction, the following remedial measures can be adopted; burn old cotton cloth or broken sacks into ash, then mix it with raw tung oil into a paste, and embed it into the cracks of the wood. After drying in the shade, it can be leveled and glued.
After the decorative veneer produces bubbling, you can first cut it along the direction of the wood grain with a sharp blade, then inject glue into the seam with a syringe, gently press the bulging part with your fingers, wipe the overflowing glue with a wet cloth, and then press it with a heavy object. It can be covered with plastic film to separate it, so that the decorative veneer is flat.
