In order to ensure that our dealers across the country have a stable price throughout the year to sell to, the factory will reserve materials to be used within 2 years to ensure that we can consistently provide dealers with good sources of materials and stable prices during market fluctuations.
Cutting: In order to ensure the maximum material yield and meet the presentation of the product, we cut all the materials uniformly from the original wood.
This is the cutting of many of our leg main materials. The large material can ensure that the cut legs are a whole. There are many same column woods on the market, which are spliced and pieced together with several pieces of wood. It is not visible in a short time. After 3-5 years, such a main body not only has no durability and tolerance, but also seriously affects the appearance and cracks seriously.
Drying: After all the materials are prepared, we enter the drying room. According to the final product landing area, the drying master will control the moisture content of the wood to ensure that the product will eventually land in the area, the wood and the local climate are most suitable for moisture content, the best state to understand the wood properties, to ensure the stability of the wood, and reduce the frequency of wood cracking.
Natural drying: The dried wood is naturally dried to ensure that each piece of wood can better complete its own expansion and contraction, thus achieving stability.
Many factories on the market may not have this process. This process is labor-intensive and time-consuming. However, this process will give us the most perfect wood grain when the final product is put into production, showing the exquisiteness of the wood (butterfly grain, mountain grain, ghost face, etc.). The beautiful grain displayed by the wood often requires manual selection of good boards from many cut boards, and how to match them.
The machine accurately makes tenons (for furniture with tenons: ① the selected materials must be longer than the actual product materials, ② the tenon and mortise assembly requires manual fine assembly), and the product is connected with full tenon and mortise, which is stable and durable.
Many products on the market do not use real tenon and mortise, but use grooves to solve the problem. This half-tenon method is actually a method of omitting the process. In the short term, there is no difference, but it will easily fall off and shake after a long time.
Rough grinding and fine grinding: This is our factory. No matter it is customized or finished furniture, we will carry out a rough grinding, fine grinding and scraping process after assembly and connection. It will be different from some solid wood customization on the market. The solid wood customization on the market may directly apply thick paint, which will cover it. At the same time, it is directly wrapped with the paint mold. Chuantianjiang has rough grinding and fine grinding, and then it is necessary to manually go from 180 mesh to 800 mesh, and then use raw lacquer process or hot wax process to make a protective film for the wood. For each line of fixed products, Chuantianjiang still retains the steps of rosewood production process.
Installation: Whether the whole house wood decoration customization presents a good appearance or not, not only has strict process requirements in production, but also requires close cooperation with your basic installation personnel in the entire installation. More importantly, it is the professionalism and flexibility of the installation team. Our installation team has served no less than 1,000 villa families and large club projects, so it is fully capable of the current customization of the entire installation work.